What kind of oil does a 2010 Mitsubishi Lancer take?
Daniel Rodriguez
Published Mar 13, 2026
What kind of oil does a 2010 Mitsubishi Lancer take?
Sae 5w-20 full synthetic motor oil is the recommended oil viscosity for the 2010 mitsubishi lancer.
What oil does a Mitsubishi Outlander 2010 take?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) SAE 5W-20 is preferred. |
|---|---|
| Capacity: | 4.9 quarts. . . . (with filter)After refill check oil level. |
| Torque: | 26-32 ft/lbs (Oil Drain Plug) |
What oil does a Evo 8 take?
The fully synthetic motor oil will also be included in Mitsubishi’s manufacturer’s maintenance program designed specifically for the Lancer Evolution VIII. Each new vehicle will be filled with Mobil 1 with SuperSyn viscosity grade 10W-30.
Can I use 5W30 instead of 5w20?
Can You Use 5w30 Instead Of 5w20. It is not recommended. Although they both have the same winter rating of 5, the thickness (viscosity) of 5w30 is a bit higher than 5w20. That means your engine’s at stake for using the high viscosity oil.
Can I use 5W-20 instead of 0W-20?
Can 5w20 be used? Yes you can use both. 0w-20 just provides better engine protection when starting up in cold cold winters. You should use what’s specified in the owner’s manual.
Can I use 5W30 instead of 0W20?
Originally Answered: Can I use 5W30 instead of 0W20 oil? 0W20 is a synthetic oil (when 0W20 was spec’d by the OEMs, only a synthetic could meet it). If the 5W30 is synthetic then you can use it. It may offer a bit more protection when operating in high ambient temps.
How much oil does a 1340 Evo take?
With the oil tank completely dry and a new filter it will take 4 qts. The baffled oil tank holds a lot of oil if you don’t let it drain for 10 to 15 min or so.
What is 10W30 engine oil?
For Example: 10W30 This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot. Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly.
Can I use 5W 40 instead of 5w20?
5W20 offers better fuel economy than 5W40 and some engines are optimised for using it and lubricating some parts. If you drive short distances only and engine remains cold, then using W40 instead W20 is not an optimal choice.
Can you use 10w 30 instead of 5W-30?
Can I Mix 10w30 and 5w30? Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine.
Is it OK to use 5w40 instead of 0W20?
Yes, but its always better to use manufacturer recommended oil grade. A manufacturer can deny warranty claimes because of wrong grade oil. The 5w40 is slightly thicker at operating temperature but pretty much the same thickness when cold.
Is 0W oil better than 5W?
A 5W oil thickens more than a 0W ( 0W is thinner). So, in Winter, 0W-30 will be the most suitable oil to use. Generally, in winter, when the temperature is much colder, the 0W-30 oil will work better and faster because it will easily warm up the moving parts and gliding surfaces of a car due to its lower viscosity.
