Do they make 1/2 inch AdvanTech?

AdvanTech 1/2-in x 4-ft x 4-ft OSB Sheathing.

Is AdvanTech better than OSB?

AdvanTech is a highly dense engineered wood. To protect against warping or swelling from water or other moisture, moisture-resistant resin is applied to every strand of wood that goes into the flooring. This step makes AdvanTech more moisture resistant than both plywood and OSB.

How far can 1/2 inch OSB span?

For 1/2-inch panel, maximum span shall be 24 inches. Span is permitted to be 24 inches on center where 3/4-inch wood strip flooring is installed at right angles to joist. Span is permitted to be 24 inches on center for floors where 11/2 inches of cellular or lightweight concrete is applied over the panels.

Can you use AdvanTech on walls?

Trusted protection for roofs and walls. What’s inside AdvanTech sheathing panels makes all the difference: Moisture-resistant resin technology resists the damaging effects of weather during construction, and a Structural 1 rating provides excellent shear resistance and added strength to your roofs and walls.

Is AdvanTech waterproof?

While AdvanTech subflooring is engineered to withstand extensive water exposure with a 500-day No Sanding Guarantee,¹ you can take extra measures to protect your material if prolonged frozen, wet or dry cycles are anticipated when the wall framing isn’t up yet.

What size OSB is used for exterior walls?

The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing. If the nails penetrate the sheathing, but not the studs, the minimum plywood thickness that the IRC designates is 1/2 inch.

Is AdvanTech OSB waterproof?

Unlike traditional commodity OSB products that can swell or delaminate, AdvanTech subflooring is engineered with a unique resin formula and process. This allows AdvanTech subflooring panels to not only stand up to snow, ice and rain without flaking or swelling, but to also maintain its strength and stiffness.

Is AdvanTech a OSB?

AdvanTech 23/32-in x 4-ft x 8-ft Tongue and Groove OSB Subfloor in the OSB department at Lowes.com.

Can you use 7/16 OSB on a roof?

Standard types of wood designed for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, without edge support, can be used in an area where the snow load is 30 pounds per square foot.

Can I use 7/16 OSB for wall sheathing?

Wall panels 7/16 Category may be used on studs spaced up to 24” o.c. LP OSB sheathing panels are designed for use in roof, wall and subfloor systems in commercial and residential projects, maintenance, remodeling or new construction. OSB sheathing panels comply with the following industry standards and certifications.

Can AdvanTech be used for roofing?

AdvanTech flooring can be used as roof sheathing. Roof applications are generally designed using more liberal deflection criteria than floors (i.e., L/240 deflection criteria for roof live loads vs. L/360 or tighter deflection criteria for residential floor live loads).

How long can AdvanTech be exposed?

500-day
Your Subfloor Will Get Wet – How To Combat Water While AdvanTech subflooring is engineered to withstand extensive water exposure with a 500-day No Sanding Guarantee,¹ you can take extra measures to protect your material if prolonged frozen, wet or dry cycles are anticipated when the wall framing isn’t up yet.

What is Advantech subfloor?

AdvanTech Subfloor. This subfloor system combines the moisture resistance, stiffness, and fastener holding power of AdvanTech Subfloor flooring panels with the polyurethane bond of AdvanTech Subfloor adhesive to give you a floor that is stronger, and quieter than any that has come before. By investing in these products together,…

What is Advantech plywood?

Advantech is an engineered wood alternative to traditional plywood. An enhanced OSB (oriented strand board) panel made of wood strands mixed with a technologically advanced resin, Advantech brings building advantages to engineered wood decking, roof sheathing, and walls.

What is OSB sheathing?

Used for sub floors, exterior walls, and roof decking, OSB sheathing is a structurally-engineered board that is made up of compressed wood strands. These strands of wood are arranged in layers that are bonded together with resin, which helps produce a strong product.

What is OSB plywood?

Stacks of OSB plywood sheets. Oriented strand board (OSB) is an engineered wood panel product made of resin -bonded wood strands or flakes. The wood strands are precisely cut and oriented in order to produce a wood panel with uniform strength and density.